Random Codes - Elementz Tech Blog RSS Feed

LCD Serial Interface Board: An Introduction to AT commands & Interfacing using UART

LCD Serial Interface Board: An Introduction to AT commands & Interfacing using UART

Jinu_EEG 05/04/2018 0
   Hello enthusiasts,In this post, I am throwing some light into introducing LCD Serial Interface Board ,familiarising you with its major AT commands used to communicate with this board. Along with this, the steps to interface this board with a micro-controller or Serial to USB converter will be depicted as well.LCD Serial Interface Board concatenates a 16x2 LCD screen controlled easily by AT (Att...
Read More
XigBee: Frugal Wireless High Speed Data Communication Alternatives for ZigBee Protocol

XigBee: Frugal Wireless High Speed Data Communication Alternatives for ZigBee Protocol

Jinu_EEG 20/03/2018 0
Hi Technojunkies,Elementz Engineers Guild  introduces the NRF Xigbee for low cost and high speed wireless   data communication  using ZigBee protocol. Module Description: Can be plugged into normal ZigBee base board.Supports AT commands to configure the system.Enables serial data transmission distance: 50 to 500 m.Single transmission efficacy: 1-70 bytes.Supports baud rates : 9600, 115200, 250000....
Read More
Interfacing Ultrasonic Sensor in Atmega 16 or Atmega 32

Interfacing Ultrasonic Sensor in Atmega 16 or Atmega 32

Jinu_EEG 03/01/2018 0
 Hello everyone,We are glad to take you through the procedure involved in interfacing an Ultrasonic Sensor with ATmega 16/32 microcontroller board. Hardware Prerequisites:-ATmega 16/32 board.Ultrasonic sensor Sensor: LED arrayAVR USB programmer:-USBasp. CP2102:-USB to TTL serial converter. Jumper Wires for making connections.Software Prerequisites:-AVR studio for coding and compilingAVRdude for bu...
Read More
Interfacing LDR Sensor In Atmega16/32

Interfacing LDR Sensor In Atmega16/32

Jinu_EEG 02/01/2018 0
Hello everyone,I’m glad to take you through the procedure involved in interfacing an LDR sensor with ATmega 16/32 microcontroller board. LDR sensor can be bought from our online store by clicking hereHardware Prerequisites:-ATmega 16/32 board.LDR sensor: You can avail this module easily from our online storeAVR USB programmer:-USBasp. This is also available in our online store by clicking hereCP21...
Read More
Running MQTT broker in Raspberry Pi

Running MQTT broker in Raspberry Pi

admin 29/12/2017 0
Today we are going to discuss implementing our own MQTT broker in RaspberryPi. We will be using Mosquitto as the MQTT broker. Mosquitto is an open source message broker that implements the MQTT (MQ Telemetry Transport) protocol v3.1.Use cases:Create our own home automation hub by interconnecting various MQTT enabled devices.Create a central hub which can be used as a bridge to connect to remote lo...
Read More
Interfacing Moisture Sensor in Atmega 16/32

Interfacing Moisture Sensor in Atmega 16/32

admin 08/12/2017 0
Hello everyone, We are glad to take you through the procedure involved in interfacing an Moisture Sensor with ATmega 16/32 microcontroller board. Moisture sensor can be bought from our online store by clicking here Hardware Prerequisites:-ATmega 16/32 board.Moisture Sensor: You can avail this module easily from our online storeLED arrayAVR USB programmer:-USBasp. This is also available in our onli...
Read More