Menu
Your Cart

Arduino ADK R3 (Arduino-Italy)

Arduino  ADK R3 (Arduino-Italy)
Arduino  ADK R3 (Arduino-Italy)
Arduino  ADK R3 (Arduino-Italy)
-13 %
Arduino  ADK R3 (Arduino-Italy)
Arduino  ADK R3 (Arduino-Italy)
Arduino  ADK R3 (Arduino-Italy)
Arduino ADK R3 (Arduino-Italy)
  • Stock: In Stock
  • Brand: Arduino
  • Model: ARDUINO-ADK-R3
  • Weight: 100.00g
  • SKU: ARDUINO-ADK-R3
Products Sold: 4
Product Views: 15577
₹3499.00
₹3999.00

Product Overview

Arduino ADK is a microcontroller board based on the ATmega2560. It has a USB host interface to connect with Android based phones. It is compatible with Android's Accessory Development Kit examples. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.

The ADK is based on the Mega 2560. Similar to the Mega 2560 and Uno, it features an Atmega8U2 programmed as a USB-to-serial converter.

The Android 3.1 platform (also backported to Android 2.3.4) introduces Android Open Accessory support, which allows external USB hardware (an Android USB accessory) to interact with an Android-powered device in a special “accessory” mode. When an Android-powered powered device is in accessory mode, the connected accessory acts as the USB host (powers the bus and enumerates devices) and the Android-powered device acts as the USB device.

Revision 3 of the board has the following new features:

1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.

Stronger RESET circuit.


Product Information

Arduino ADK Summary

  • Microcontroller ATmega2560
  • Operating Voltage 5V
  • Input Voltage (recommended) 7-12V
  • Input Voltage (limits) 6-20V
  • Digital I/O Pins 54 (of which 15 provide PWM output)
  • Analog Input Pins 16
  • DC Current per I/O Pin 40 mA
  • DC Current for 3.3V Pin 50 mA
  • Flash Memory 256 KB of which 8 KB used by bootloader
  • SRAM 8 KB
  • EEPROM 4 KB
  • Clock Speed 16 MHz
  • USB Host Chip MAX3421E

Arduino ADK Applications

  • Develop accessories for Android (v2.3.4 and above) devices using ADK.
  • For Android devices not supporting ADK, use MicroBridge to develop accessories.
  • Make Android devices interact with the physical world as an Arduino compatible platform with 256K Flash.
  • On board USB host makes it easy to interact with USB devices like pen drivers, keyboard, mouse, Bluetooth dongles, etc...

Arduino ADK Package:

1 x  Arduino ADK R3g on commands provided via an android application. This robot  performs all sorts of robotic movements like forward,backward,left,right etc . The robot is interfaced with a bluetooth module at the receiver side. This initiates to provide input commands from the user using android application to the  receiver end where robotic actions are performed . The micro-controller at the receiver side then takes appropriate  action for controlling the movements of the robotic wheels.

Write a review

Please login or register to review
Site uses Cookies
This site uses cookies to provide and improve your experience. By continuing to use this site, you agree to accept these cookies.