Menu
Your Cart

User Interface Shield With 0.96 Inch SPI OLED Display Module

User Interface Shield With 0.96 Inch SPI OLED Display Module
-30 %
User Interface Shield With 0.96 Inch SPI OLED Display Module
  • Stock: In Stock
  • Brand: rhydoLABZ
  • Model: USER-INTERFACE-SHIELD-OLED
  • Weight: 300.00g
  • SKU: USER-INTERFACE-SHIELD-OLED
Products Sold: 1
Product Views: 13060
₹699.00
₹999.00

Description:

The rhydoLABZ UI Shield provides an easy way of interfacing OLED display modules with your Arduino boards. It features a monochrome OLED (0.96") display module, along with 5 keypad pins and few other added features. The 4 directional buttons plus select button allows basic control input. This feature packedshield, coupled with convenient display module, makes an ideal platform to build a stand-alone project with its own user interface.

The communication interface between the OLED display and the controller is via hardware SPI pins of the Arduino. Both the DC and CS signals of the display module are jumpered on the shield PCB for easy hardware configuration. Reset pin (RES) of the OLED module comes in connection with D10 of the Arduino.DC signal determines whether the transferred data is written to display data RAM or command register. You could use the SPI library provided under the resources tab below to display alphabets, numbers, symbols, images and anything once you know to handle the pixels.

Additionally the shield also supports standard character display (16x2). A character display can be used in 4 bit mode saving a few of your output pins, a contrast adjustment trim-pot is also provided for the same. Apart from the display interfacing, it has input switches, on board buzzer and LEDs. Shield uses the digital pins D8 to D13 for LCD interfacing, D3 toD7 for keypad buttons and D2 for buzzer. Analog pins A2, A3 and A4 are connected with LEDs, A0 comes in connection with a preset; put to use the ADC functionality. Arduino reset switch is brought out on the shied for easy accessibility.

This product comes as a kit! Includes high quality PTH PCB, 0.96" OLED display and other onboard features (buttons, buzzer, header etc). Most of the connections are jumper selective which makes it apt for prototyping as well. Ultimately rhydoLABZ UI shield is the super slick way to add a display without all the wiring hassle on your Arduino.

NOTE: The images sport out 1.3" monochrome OLED display, but the shield actually accompanies 0.96" monochrome OLED display.

 

Product Overview:

Features:

  • Operating Voltage: 5V
  • Comes with a 0.96" OLED Display
  • 5 Momentary switches for custom menu control panel
  • RST button for resetting arduino program
  • Supports OLED Display (0.96" and 1.3") , SPI interfacing
  • Supports 16x2 Character display, 4bit mode
  • Trimmer resistor for varying analog input
  • On board buzzer for audio alert
  • Plug and play with any Arduino
  • Mounting support for display modules
  • Professionally Designed High Quality PTH PCB
  • Dimensions: 81.4x53.5 (MM)

OLED Display Specification:

  • OLED Driver IC: SSD1306
  • Display Pixel Color: Blue
  • Resolution: 128 x 64
  • Visual Angle: >160°
  • Compatible I/O Level: 3.3V, 5V
  • Mini Size: 2.7 x 2.8 (CM)
  • RES is the reset signal input pin. When this pin is pulled LOW, initialization of the chip is executed. Keep this pin HIGH (i.e. connect to VDD)  during normal operation. CS is the chip select input pin (active LOW). Data/Command control is done over the D/C pin; when it is pulled HIGH (i.e. connect to VDD), the input data is treated as data. When it is pulled LOW, the input data will be transferred to the command register. SDA and SCK are the data and clock pins, respectively, used for communication with the controller.
  • Package Includes:

  • 1 x  User Interface Shield
  • 1 x  0.96" OLED Display Module
  • 9 x  Jumpers - 2.54mm
  •  

Write a review

Please login or register to review
Site uses Cookies
This site uses cookies to provide and improve your experience. By continuing to use this site, you agree to accept these cookies.